UBPet C31 Self-Cleaning Cat Litter Box
Spacious cabin fits cats up to 2.2–24 lbs (1-10.9 kg)
Patented dual rake with 0.31 inches (8 mm) gap cleans thoroughly
Ultra-sensitive sensors stop to protect your cat
Tracks multiple cats and health data in real time
Non-stick Teflon Coating Bottom is scratch-resistant and easy to clean
Note: Orders will ship on December 4th.
- OVERVIEW
- SPESC
- FAQ
- REVIEW
How It Works？
C31 Self-Cleaning Cat Litter Box
Spacious Design
Fits cats up to 24 lbs (10.9 kg)
Patented Dual Rake
0.31 inches (8 mm) gap,
deeper clean, works with most litter
Cat-Safe Sensors
Prevents pinching in any scenario
Smart Detection
Multi-cat recognition & real-time health tracking
Non-Stick & Easy Clean
Teflon Coating Bottom, non-stick, scratch-resistant, easy to wash
Spacious Room for Cats to Move
Suitable for small to large cats, with a weight range of 2.2 to 24 lbs (1–10.9 kg)
-
Toilet ReportRecords toilet frequency, duration, and weight changes, with app-synced health reports
-
Multi-Cat RecognitionSupports independent data management for up to five cats
-
Smart RemindersWaste Bin full warning, Deodorizing Block replacement reminder
Dual Rake Design for Thorough Cleaning
Metal rakes with silicone edges remove sticky waste for a spotless box.
4 Ultra-Sensitive Sensors
Keep Cat Safe
The C31 accurately detects cats inside or pressing against the base. If contact occurs during operation, the system pauses immediately to protect your cat.
Let C31 Do the Dirty Work
-
Always Clean, Always EasyNo more clumps or stuck litter - C31 keeps your cat litter box spotless and maintenance simple.
-
Advanced Teflon Coating BottomPremium Teflon coating prevents buildup, resists scratches, and makes every clean effortless.
-
Rinse and RefreshEasily remove the tray and rake for quick, hassle-free cleaning.
Anti-Slip Design
Designed with raised grooves, the Lid keeps your cat safe from slipping.
Easy to Clean and Assemble
All Parts Are Removable for Hassle-Free Cleaning
Slide Open the Cover
Remove the Rake
Open the Box Lid
Remove the Tray
Remove the Waste Bin
Clean the Waste Bin
Easy to Clean and Assemble
-
1
Slide Open the Cover
-
2
Remove the Rake
-
3
Open the Box Lid
-
4
Remove the Tray
-
5
Remove the Waste Bin
-
6
Clean the Waste Bin
Enclosed Bin & Odor Eliminator for Breathe Freely
Enclosed Bin & Odor Eliminator design, with a deodorizing block included which can be installed in the cat litter machine to reduce odor
Universal Litter Compatibility
0.31 inches (8 mm) rake tooth gap is compatible with most common cat litter, such as bentonite litter, mineral litter and cassava litter, etc. (long strip-shaped litter cannot be used)
Specifications
DETAILS+DIMENSIONS
BOX CONTENTS
Smart Cat Litter Box *1
Power Adapter *1
User Manual *1
Deodorizing Block *1 Box (3 pcs)
Waste Bag *1 Roll (20 pcs)
FAQs
-
How is my cat’s safety ensured?
Zero risk of pinching cats:
1. The open design allows cats to enter and exit freely, eliminating the risk of pinching at the source.
2. Weight-sensing intelligent safety protection: Constantly monitors environmental changes to protect your cat at all times. -
Which cats is it suitable for?
1. The low, wide entrance is friendly for elderly cats, overweight cats, short-legged cats, and cats with limited mobility. No step is needed for easy access.
2. For cats under 6 months old, weighing less than 3.3 lbs/1.5 kg, or with limited mobility, please set the device to manual mode. -
Will litter scatter outside?
Cats may carry a small amount of litter on their paws after use. We recommend:
1. Using a custom anti-scatter cover.
2. Placing a litter mat at the entrance (please do not place the machine directly on the mat).
-
How often should I change cat litter?
Based on the scale lines inside the litter bin, it is recommended to replace the litter every 2–3 weeks for a single cat. You can also set up a usage-count reminder in the APP.
-
Why can’t I pair the device right after powering on?
After powering on, the device resets first (status light flashes green).
Once reset is complete, the status light will turn solid blue.
At this point, you can proceed with Wi-Fi pairing. -
How do I add cat litter?
1. Make sure the machine is in standby mode (initial position).
2. Pour cat litter into the litter tray, not exceeding the MAX line.
3. Use a scoop to level the litter if needed.
4. After adding litter, the weight sensor will trigger a green light. Press the [Flatten] button, and after leveling is done, the device will return to standby.
-
What should I do if the litter rake gets jammed?
During operation, the litter rake may move back and forth several times — this is normal. If a jam occurs during cleaning or leveling, the system will automatically attempt to resolve it and notify you via the app, showing the exact jam location. If the jam persists, the system will enter protection mode: the red status light will turn on, the button indicator will flash, and the app will remind you to clear the jam.
Note: Do not forcibly pull or twist the rake when a jam occurs. -
Why can’t I remove the litter rake, and how can I fix it?
When the rake cannot be removed, the app will display a "blockage" alert and the machine's red light will turn on.
1. Disconnect the power, then reconnect it. Restart the device so that the rake teeth can reset to their initial position.
2. Once the rake teeth have returned to the starting position, remove the rake. -
What should I do if the litter rake is deformed?
Clean the rake teeth regularly. Minor deformation can be corrected manually. For severe deformation, please purchase a replacement rake through official channels.
